Product Overview

The Cisco Aironet® 1300 Series Outdoor Access Point/Bridge (Figure 1) is an 802.11g access point and bridge that provides high-speed and cost-effective wireless connectivity between multiple fixed or mobile networks and clients. Building a metropolitan-area wireless infrastructure with the Cisco® Aironet 1300 Series provides deployment personnel with a flexible, easy-to-use solution that meets the security requirements of wide-area networking professionals.

The Cisco Aironet 1300 Series supports the 802.11g standard—providing 54-Mbps data rates with a proven, secure technology while maintaining full backward compatibility with legacy 802.11b devices. Cisco Systems® makes the maintenance and installation of the Cisco Aironet 1300 Series easy by integrating it with your wired network via the Cisco Structured Wireless-Area Network (SWAN) solution. Based on Cisco IOS® Software, the Cisco Aironet 1300 Series provides advanced features such as Fast Secure Roaming, quality of service (QoS), and VLANs.

The flexibility of the Cisco Aironet 1300 Series allows it to operate as a wireless bridge, access point, or a workgroup bridge.

Interfacing

Status LEDs	AIR-BR1310G-x-K9 and AIR-BR1310G-x-K9-R: Four LEDs: Install, Radio, Status, and Ethernet
F-Type Connectors	AIR-BR1310G-x-K9 and AIR-BR1310G-x-K9-R: Dual coaxial cable carries full-duplex Ethernet, DC power, and full-duplex console port (RS-232 connection)
Antenna Interface	Air-BR1310G-x-k9: Air interface (integrated directional antenna) AIR-BR1310G-x-k9-R: Two RP-TNC type connectors for external antennas
Grounding Lugs	AIR-BR1310G-x-K9 and AIR-BR1310G-x-K9-R: Two grounding lugs for lightening protection.
Status LEDs	AIR-PWRINJ-BLR2 AIR-PWRINJ-BLR2AIR-PWRINJ-BLR2T: One bicolor LED showing power status
F-Type Connectors	AIR-PWRINJ-BLR2 AIR-PWRINJ-BLR2T: Dual coaxial cable carries full-duplex Ethernet, DC power, and full-duplex console port (RS-232 connection)
DC Power	AIR-PWRINJ-BLR2 AIR-PWRINJ-BLR2T: One two-pin Switchcraft connector (with threaded locking sleeve) and matching connector
RJ-45 Interface	AIR-BR1310G-x-K9 and AIR-PWRINJ-BLR2T: One RJ-45 connector for console-port access (9600 bps only), a second RJ-45 connector for 10/100BASE-T LAN interface

Power Management

Power Injector LR2	The power injector converts the standard 10/100BASE-T Ethernet Cat5 RJ-45 interface that is suitable for weather-protected areas to a dual F-Type connector interface for dual coaxial cables that are more suitable for harsh outdoor environments.
Power Injector LR2T	The Power Injector LR2T supports all the capability of LR2. It is designed for use in transportation applications and operates with an input voltage range of +12 to +40V DC.
Power Supply	48V DC supply for AIR-PWRINJ-BLR2= User-supplied 12 to 40V DC source for AIR-PWRINJ_BLR2T=. Could require an external load-dump-module for automotive and bus installations.

Memory

Eight megabytes of Flash memory

Memory space for future firmware upgrades to support new 802.11 standards and advanced features.

Protocol

Air Interface Standard	IEEE 802.11b or IEEE 802.11g Note: bridge mode has enhancements to the standard to allow longerrange bridging communications.
Frequency Band	2.412 to 2.462 GHz (FCC); 2.412 to 2.472 GHz (ETSI); 2.412 to 2.472 GHz (TELEC)
Wireless Modulation: 802.11b	Direct Sequence Spread Spectrum (DSSS): Differential Binary Phase Shift Keying (DBPSK) at 1 Mbps
Quadrature Phase	Differential Quadrature Phase Shift Keying (DQPSK) at 2 Mbps
Code Keying	Complementary Code Keying (CCK) at 5.5 and 11 Mbps
802.11g	Orthogonal Frequency Divisional Multiplexing (OFDM): BPSK at 6 and 9 Mbps
QPSK	QPSK at 12 and 18 Mbps
Quadrature Amplitude Modulation	16-quadrature amplitude modulation (QAM) at 24 and 36 Mbps
QAM	64-QAM at 48 and 54 Mbps
Media Access Protocol	Carrier Sense Multiple Access/Collision Avoidance (CSMA/CA)
Operating Channels: 802.11b/g:	ETSI: 13; Americas: 11; TELEC (Japan): 13
Non-Overlapping Channels	3
Authentication	802.1X support including LEAP to yield mutual authentication and dynamic per-user, per-session encryption keys
Encryption	Cisco TKIP; key hashing (per-packet keying) and Message Integrity Check (MIC)
Security—Bridge Role	AES-ready
Authentication	802.1X support including LEAP, PEAP, EAP Message Digest 5 (EAP MD5), EAP TLS, and EAP FAST to yield mutual authentication and dynamic per-user, per-session encryption keys
Encryption	Cisco TKIP and WPA TKIP; key hashing (per-packet keying) and MIC
Security—Access-Point Role	AES-ready
Authentication	802.1X support including LEAP to yield mutual authentication and dynamic per-user, per-session encryption keys
Encryption	Cisco TKIP; key hashing (per-packet keying) and MIC
Security—Workgroup-Bridge Role	AES-ready
SNMP Compliance	Versions 1 and 2

Antennas

AIR-BR1310G- x-K9 Integrated Antenna

Vertical polarization; 13 dBi gain; 36 E-plane by 38 H-plane (3 dB beam width)

Product Specifications

Access-Point Compatibility	Compatible with any Wi-Fi certified client device for basic capability Compatible with Cisco Aironet clients and Cisco Compatible Clients for Extended Capability
Workgroup-Bridge Compatibility	Supports operation with Cisco Aironet access points and Cisco bridges
Wireless-Bridge Compatibility	Only compatible with other Cisco Aironet 1300 and Aironet 350 series wireless bridges